Enter an environmental order

Enter an environmental order

Part of: Environmental Surveillance — workflow overview

How-to · Reception · Environmental

At a glance

Purpose

Register an environmental sample (water, soil, food…) against a regulatory standard and submit it for testing.

You'll end up with

A submitted environmental order — labelled, stored, and QA-reviewed — waiting for results entry.

Who does this

Reception / sample-entry staff. Access is set by user permissions and can be configured by your administrator.

Before you start

The sampling site must exist; the applicable compliance standard and the test's reference data must be configured (see “Define a compliance standard”).

Where

Main menu → Order → Add Environmental Order → Enter Order.

Overview

An environmental order is tied to a sampling site rather than a patient, carries a per-sample manifest, and is scored against a compliance standard. This page covers building and submitting the order; entering results, validating, and generating the certificate are separate tasks (see What’s next).

Enter the order

  1. Open Main menu → Order → Add Environmental Order → Enter Order and click Generate Lab Number. Search the Sampling Site by name or code (e.g. “MUL” → MULAGO) and set the default collection conditions (collection method is optional).

Generate lab number
Generate lab number
  1. Select the site by searching. Fields marked with a red asterisks * are mandatory

Search site
Search site
Site selected
Site selected
  1. Under Applicable Compliance Standards, select the standard(s) that apply (e.g. PP 22/2021).

Select compliance standard
Select compliance standard
  1. In the Per-Sample Manifest, add a row per physical sample (Sample Type + Container, plus GPS/date if recorded),

Sample manifest
Sample manifest
  1. Open Tests & Panels

Select drop-down
Select drop-down
  1. Click at least one test. Click Save & Next.

Select a test and save
Select a test and save

Note: tests are not auto-suggested from the standard — choose them manually (auto-suggestion is planned, not yet available). The order will not save without at least one test.

Label & store the samples

This stage is the same for every order type:

  1. Click Save & Next button on previous stage

Save & Next
Save & Next
  1. Print label

  1. Assign storage or skip -optional

  2. Click Save & Next to continue to QA

 

Complete QA review

Then complete QA review and submit — the order is then submitted and awaits results:

Field reference

Sampling Site

Search by site name or code prefix (e.g. “MUL” → MULAGO). Required.

Compliance Standard

Regulatory standard(s) the order is scored against (e.g. PP 22/2021). Required.

Sample Type / Container

Per manifest row — the physical sample and its container.

Tests & Panels

At least one test required, or the order will not save.

Tips & notes

  • Site search matches the start of the name or the site code.

  • If you see “add a patient or sampling site” on save, the field actually missing is the test.

  • Defining compliance standards and a test’s holding time are administrator tasks — see the Admin guide.

What’s next

  • Enter results & read the compliance evaluation

  • Validate & release results

  • Generate a compliance certificate